9 Best Dimmable 8 Foot LED Shop Lights (November 2026)
The best dimmable 8ft led shop lights include the HYPERLITE 8FT LED Vapor Tight Light Fixture for dimming indoors and in wet rooms, the ELEKICO Super Bright 100W 5000K 15000LM 8FT for bright bays that rarely dim, and the Barrina T8 8FT LED Shop Lights 10-Pack for a whole shop on a budget.
On this page (5 sections)
The best dimmable 8 foot LED shop light for most garages is the HYPERLITE 8FT LED Vapor Tight, a sealed fixture that dims from 10% to 100% on a 1-10V control. You pick 120W, 100W or 80W at install time, so the top end of the light fits the room before the dimmer does anything.
If you want raw output and plan to dim at the wall switch, the ELEKICO 100W puts 15000 lm on the ceiling in a ten-pack. A whole-shop budget build is easier with the Barrina T8 pack, which draws 72W per light.
This page covers the fixtures worth wiring to a dimmer, how 1-10V control works, and which light suits a wet bay, a tall ceiling or a low one.
Our picks at a glance
-
1
Best for dimming indoors and in wet roomsHYPERLITE 8FT LED Vapor Tight Light Fixture
9.5/10 our score
See it on Amazon -
2
Best for bright bays that rarely dimELEKICO Super Bright 100W 5000K 15000LM 8FT
9.3/10 our score
See it on Amazon -
3
Best for a whole shop on a budgetBarrina T8 8FT LED Shop Lights 10-Pack
9.2/10 our score
See it on Amazon
- 4
Check itPhiwicsh 8FT V-Shape LED Shop Lights 10-Pack
Best for tall ceilings and corners - 5
Best for simple hardwired setupsCheck it - 6
Check itELEKICO 8FT 100W 19500LM Linkable Shop Lights
Best for maximum output per fixture - 7
Check itONLYLUX 8FT 100W LED Shop Lights 12-Pack
Best for very large shops - 8
Check itELEKICO 8FT 100W LED Shop Lights 6-Pack
Best for a six-light starter layout - 9
Check itHYPERLITE 8 Foot LED Vapor Proof Light
Best for carports and wet outdoor bays
The best dimmable 8ft LED shop lights for your space
HYPERLITE wins on control because it is the only pick that both dims and lets you cap the wattage. Every other light here reaches full output on its own and relies on how you wire it.
HYPERLITE 8FT LED Vapor Tight Light Fixture: Best for dimming indoors and in wet rooms
- 1-10V dimming from 10% to 100%
- 120W, 100W or 80W switchable
- 3000K, 4000K or 5000K switchable
- IP66 and ETL listed
A sealed fixture that dims to 10% on a 1-10V control and switches wattage and color before you mount it.
Pros
- 1-10V dimming down to 10%
- Wattage and CCT switches
- IP66 sealed housing
Cons
- Needs a compatible dimmer wired to the 1-10V pair
- Two-pack only
HYPERLITE suits a garage, workshop or car wash where full brightness is too much for detail work and dim light is too little. Its 1-10V dimming runs from 10% to 100%, so a 15600 lm fixture can drop to a soft level without flicker complaints from cheap triac dimmers.
Two switches on the body set the ceiling of its output. Choose 120W for the brightest run, then 100W or 80W if the fixture is close to a workbench.
The color switch gives you 3000K, 4000K or 5000K, which is rare on an 8ft tube.
At 94 inches long and 6 pounds, it is light enough for one person to lift onto the brackets. The kit includes anchors, drywall screws, U brackets and wire nuts, so the hang is a one-trip job.
The polycarbonate housing, silicone gaskets and waterproof cables are what earn the IP66 rating, and ETL listing covers the electrical side. The touch control method adds a soft-touch way to manage the light without hunting for a switch in the dark.
The trade-off against the ELEKICO and Barrina packs is the two-pack size. You also need a dimmer that sends a 1-10V signal rather than a plain wall switch.
It suits buyers who want control over both the light level and the color before the fixture goes up.
Get it when control matters more than covering a 12-light shop in one order.
ELEKICO Super Bright 100W 5000K 15000LM 8FT: Best for bright bays that rarely dim
- 100W, 5000K
- 15000 lm output
- Up to 3 linked per run
- ELEKICO says 50,000-hour life
A ten-pack of daylight tubes for a big shop floor, wired with a wall dimmer at the circuit level.
Pros
- High output per fixture
- Up to 3 linked in series
- Ten lights in the box
Cons
- No on-fixture dimming control
- 5000K only
ELEKICO suits a large shop floor where the lights stay near full output and you want a single wall control for the row. Each fixture runs 100W at 5000K for 15000 lm, and up to 3 lights link in series with the included cords and connectors.
Five power cords with on/off switches come in the box, so the wiring plan is simpler than buying switches separately. The 59 inch cords reach a ceiling outlet without extension runs.
Dimming happens on the circuit, using a wall dimmer rated for the combined load. The app control method gives you a way to manage the row from a phone, though the on/off switches stay the simplest option.
The tubes are only 1.2 inches wide and 1.5 inches deep, so they sit close to the ceiling and leave headroom for a garage door track. ELEKICO rates the set at a 50,000-hour life and offers a five-year maintenance period.
The painted finish holds up in a garage that sees dust and temperature swings.
Against the HYPERLITE, you lose the on-fixture dimming and the color switch. Against the Barrina pack you gain output per light but lose the lowest-wattage option.
The ten-pack size means a two-car garage will have spares left over.
Pick it for a busy bay that wants bright white light most of the time and dips only now and then.
Barrina T8 8FT LED Shop Lights 10-Pack: Best for a whole shop on a budget
- 72W, 5000K
- 10000 lm per light
- Up to 4 linked per run
- Barrina provides a 3-year warranty
Ten slim tubes that cover a large shop with even daylight for the least power draw here.
Pros
- Lowest wattage in this group
- Up to 4 linked in a row
- Wide coverage from 10 fixtures
Cons
- Lower output per light than the others
- 3-year warranty is the shortest here
Barrina suits a shop that needs light everywhere and a low power bill. Ten tubes at 72W each give 10000 lm, which is less per fixture than the others here but still bright across a wide floor.
The lower wattage is the point. At 138 lm per watt, a row of these lights on a dimmer can be dimmed through the circuit and still leave headroom on the dimmer's load rating.
Up to 4 link in a row, and Barrina says the second generation uses male-female connectors to cut the chance of a wrong connection.
Each light comes with a hardwire lead and there are five power cords with on/off switches in the kit, so a mix of switched and hardwired runs is possible. The 5000K daylight is smooth and the fixture has no ballast buzz or flicker.
Barrina backs the set with a 3-year warranty, the shortest here. The 94 inch by 6.1 inch body gives the tubes a wider profile than the slim ONLYLUX and ELEKICO tubes, which spreads the light more evenly across a ceiling.
Choose it when coverage and running cost matter more than peak brightness. It is also the friendliest pack for a first-time buyer wiring a long row, because the connectors are designed to stop mistakes.
Phiwicsh 8FT V-Shape LED Shop Lights 10-Pack: Best for tall ceilings and corners
- 90W, 6500K
- 12000 lm per light
- V-shape 270-degree spread
- Up to 4 linked per run
A V-shaped tube that throws light sideways as well as down, which suits high bays and dark corners.
Pros
- 270-degree light spread
- 6500K cool white
- Up to 4 linked in a row
Cons
- Cooler color than most garages want
- No dimming control of its own
Phiwicsh suits a tall ceiling or a room with dark corners, because its V-shaped tube throws light out to 270 degrees instead of straight down. Each 90W fixture puts out 12000 lm, and 10 come in the pack.
The V-shape matters in a barn or a garage with deep shelving, where light needs to bounce sideways to reach the back of a bay. The double row of high-density chips works out to 133 lumens per watt.
You can link up to 4 in a row, and the kit includes screws, mount clips, end caps and power cords. A clear cover sits over the chips, which protects the LEDs without cutting the output much.
The color is 6500K, cooler and bluer than the 5000K picks here. Some people like that in a shop.
Others find it harsh in a home garage. The 60,000-hour rated life is the longest in this group, so the cool color is the main thing to weigh.
If you want a softer color, run the HYPERLITE at 4000K instead. Choose Phiwicsh for spread and cool light.
ONLYLUX 8ft LED Shop Light: Best for simple hardwired setups
- 90W, 5000K
- 12000 lm per light
- Plug and play or hardwired
- 10 fixtures in the box
A slim ten-pack with both plug-in cords and hardwire leads, so either wiring path works out of the box.
Pros
- Plug and play or hardwired
- Up to 3 linked in series
- Full wiring kit included
Cons
- No dimming built in
- Slim tube has no lens over the LEDs
ONLYLUX suits a first shop build where the wiring is still up in the air. Each 90W fixture gives 12000 lm at 5000K, and the box includes both plug-in cords and hardwire leads, so you can hang it now and hardwire it later.
Nothing about the 8ft tube is fancy. It is 1.25 inches wide with an aluminum body, lightweight and simple to mount with the clips in the box.
Up to 3 link in series, and ONLYLUX advises against going beyond that in one run.
For a dimmer, treat the whole run as one load on a wall dimmer. The polished satin finish on the housing looks clean in a visible ceiling run.
Against the ELEKICO pack, it is slightly less bright per light. Against the HYPERLITE, it has no dimming control at all and no color choice.
The kit also skips the long power cords with switches that some other packs include, so check what you need before ordering.
Pick it when the wiring has to stay flexible for a while. The 50,000-hour rating and the plug-and-play setup make it an easy first fixture for a new shop.
ELEKICO 8FT 100W 19500LM Linkable Shop Lights: Best for maximum output per fixture
- 100W, 5000K
- 19500 lm per light
- 960 LED chips in a V-shape
- Linkable runs
The brightest light here per fixture, built for large bays where fewer lights mean less wiring.
Pros
- Highest output of the group
- V-shape spreads light wide
- Fewer fixtures needed for big rooms
Cons
- No on-fixture dimming
- Very bright for a low ceiling
ELEKICO's upgraded 8ft tube suits a big shed or workshop where you would rather hang fewer lights. Every fixture pushes 19500 lm from 100W, the highest output on this page, using 960 LED chips in a V-shape.
That output cuts the number of fixtures a large bay needs, which also cuts the number of wiring points on a dimmer circuit. The aluminum body is built for a long life at 50,000 hours.
Linkable runs keep the cable runs short. The V-shape design raises chip exposure so the light reaches corners that a flat tube would leave dim.
The catch is a low ceiling. That much light close to a workbench will feel harsh, and there is no on-fixture dimming to soften it.
Use a wall dimmer or mount higher. It is also a ten-pack only, so a small garage ends up with spare lights.
The flush mount keeps the tube tight to the ceiling, which helps in a garage with a low door track.
Go for it when ceiling height and floor size both call for a lot of light from a small fixture count.
ONLYLUX 8FT 100W LED Shop Lights 12-Pack: Best for very large shops
- 100W, 6000K
- 15000 lm per light
- Up to 3 linked in series
- ONLYLUX provides a 5-year maintenance period
Twelve high-output tubes for a barn or warehouse floor that needs light in every bay.
Pros
- Twelve fixtures in one order
- Fits AC100-277V power
- 5-year maintenance period
Cons
- 6000K is cooler than a typical garage likes
- No dimming control
ONLYLUX's 12-pack suits a shop large enough that one order should cover the whole ceiling. Each 100W light gives 15000 lm at 6000K, and the fixtures take AC100-277V, so a commercial supply works as well as home power.
The four-row chip layout and V-shape 270-degree design push efficiency to 150 lm per watt. Twelve lights in one box keep the wiring plan simple: up to 3 link in series per run, then a feed from the panel to each run.
ONLYLUX backs the set with a 5-year maintenance period. The thickened aluminum housing helps the 768 chips run cooler over long shifts.
The trade-off is the color. 6000K is cooler than the 5000K picks here, and much cooler than the 4000K setting on the HYPERLITE.
Some buyers love it for a shop, others will find it clinical in a garage. There is no dimming control on the fixture either.
It mounts flush to the ceiling and comes with the hardware for a wall or ceiling hang.
Buy it when coverage across a big floor beats color choice. A 12-pack like this also means one order covers a barn without a second shipment.
ELEKICO 8FT 100W LED Shop Lights 6-Pack: Best for a six-light starter layout
- 100W, 5000K
- 15000 lm per light
- Up to 3 linked per run
- AC100-277V input
A smaller box of bright tubes for a two-car garage or a workbench run, with snap joints for a quick hang.
Pros
- Good fixture count for a home garage
- Plug and play with on/off cord
- Up to 3 linked in a row
Cons
- Not suited to ceilings of 20 ft or higher
- No dimming control
ELEKICO's 6-pack suits a two-car garage or a workbench run where ten lights would be overkill. Each 100W tube gives 15000 lm at 5000K with 768 chips in a V-shape, and 3 can link in series with the included connectors.
The snap joints let you hang each light and plug it in, and the kit includes three power cords with on/off switches plus four connector cables. AC100-277V input covers most home and small commercial panels.
ELEKICO lists a 50,000-hour life and up to 70 percent energy savings against fluorescent tubes. The aluminum body keeps the weight down so the snap joints do not have to carry much.
ELEKICO notes these are not suited to ceilings of 20 ft or higher, so a tall barn needs the V-shape Phiwicsh or the brightest ELEKICO instead. There is no dimming control on the fixture.
The 1.3 inch profile is slim enough to tuck between joists in a low garage.
Choose it for a home garage where six lights cover the bays and the bench.
HYPERLITE 8 Foot LED Vapor Proof Light: Best for carports and wet outdoor bays
- 1-10V dimming from 10% to 100%
- 120W, 100W or 80W switchable
- 3000K, 4000K or 5000K switchable
- IP66 sealed body
The same sealed dimmable build as the top pick, sold as a four-pack and listed for wall or ceiling mounting outdoors.
Pros
- 1-10V dimming to 10%
- IP66 housing for wet spots
- Four fixtures in the box
Cons
- Four-pack costs more than the two-pack up front
- Needs a compatible dimmer and wiring
HYPERLITE's four-pack suits a carport, wash bay or outdoor shop where water and steam are part of the day. It is the same sealed build as the top pick: IP66 housing, 1-10V dimming from 10% to 100%, and switches for 120W, 100W or 80W and 3000K, 4000K or 5000K.
The 15600 lm output matches the two-pack, and the polycarbonate body, silicone gaskets and waterproof cables mean a hose-down or a damp night will not get inside. At 94 inches long and 6 pounds, it mounts to a wall or ceiling with the included U brackets and anchors.
This version is listed for wall mounting as well as ceiling, which gives more options over a carport or along a wash bay wall.
The trade-off is the box size and the dimmer wiring. A four-pack costs more up front than two, and 1-10V control still needs a compatible dimmer.
The sealed body also weighs a bit more per foot than a slim tube, so plan the brackets accordingly.
Buy it when the lights live outdoors or in a wet room.
How these dimmable shop lights compare
Four of the nine fixtures here dim on a 1-10V control and the rest run at full output on any switch. The table lines up output, wattage, color and dimming so you can see the gap before you pick.
| Product | Best for | Output | Watts | CCT | Our score |
|---|---|---|---|---|---|
| HYPERLITE 8FT LED Vapor Tight Light Fixture | dimming indoors and in wet rooms | 15600 lm | 120W, 100W or 80W | 3000K, 4000K or 5000K | 9.5 |
| ELEKICO Super Bright 100W 5000K 15000LM 8FT | bright bays that rarely dim | 15000 lm | 100W | 5000K | 9.3 |
| Barrina T8 8FT LED Shop Lights 10-Pack | a whole shop on a budget | 10000 lm | 72W | 5000K | 9.2 |
| Phiwicsh 8FT V-Shape LED Shop Lights 10-Pack | tall ceilings and corners | 12000 lm | 90W | 6500K | 8.8 |
| ONLYLUX 8ft LED Shop Light | simple hardwired setups | 12000 lm | 90W | 5000K | 8.7 |
| ELEKICO 8FT 100W 19500LM Linkable Shop Lights | maximum output per fixture | 19500 lm | 100W | 5000K | 8.5 |
| ONLYLUX 8FT 100W LED Shop Lights 12-Pack | very large shops | 15000 lm | 100W | 6000K | 8.3 |
| ELEKICO 8FT 100W LED Shop Lights 6-Pack | a six-light starter layout | 15000 lm | 100W | 5000K | 8.1 |
| HYPERLITE 8 Foot LED Vapor Proof Light | carports and wet outdoor bays | 15600 lm | 120W, 100W or 80W | 3000K, 4000K or 5000K | 8.0 |
Our score weighs specs, features and how well each light fits a buyer wiring an 8ft shop row on a dimmer.
How we compared these 8ft fixtures
We compared each fixture on four points that matter for a shop with dimming: how it dims, how much light it makes, what color it gives, and what the housing handles. We checked the control method first, because a 1-10V fixture and a plain tube are wired differently and cannot share a dimmer.
Then we looked at wattage and lumen output to work out coverage per fixture. Housing and listing came last, and a sealed IP66 body scored higher than a slim tube for damp bays.
Color switches and wattage switches added points because they let one fixture suit more rooms. Finally, the box size and pack count shaped who each light suits: a two-pack for a small shop, a twelve-pack for a barn.
We did not include lights that cannot dim on any path, and we set scores so the fixtures with the most control and output sit at the top. Lumen per watt gave us a fair way to compare efficiency across the different wattages, since a 72W tube and a 120W tube are not equals on a power bill.
Buying advice for dimmable 8ft led shop lights
Most 8ft LED tubes are not dimmable, so the first question is whether the fixture has a dimming input at all. The HYPERLITE pair here do.
The rest need a dimmer on the circuit, and that only works if the dimmer is rated for the combined load.
Which dimming method do these lights use?
The two HYPERLITE fixtures take a 1-10V signal, sent on two low-voltage wires alongside the main power. You need a dimmer or lighting control that outputs that signal, which is common on commercial controls and less common on home wall dimmers.
A standard on/off switch will only turn the light on and off.
The other seven lights here have no dimming input. They dim only if you put a compatible dimmer on the circuit, the same way you would dim a bank of fixtures on a home dimmer.
Check the dimmer's minimum load and its compatibility with the driver before you plan a long row. If you are unsure which lights can dim at all, read our guide on whether LED shop lights are dimmable before buying.
A dimmer built for LED loads is the safer match than an old incandescent dimmer, which can buzz or flicker at low settings.
Wattage switch or dimmer: which saves more power?
Both save power, but they work at different points. A wattage switch on the HYPERLITE sets the top of the fixture, so running 80W instead of 120W caps the draw for good.
A dimmer takes the fixture below that cap whenever you want less light.
For a shop that runs mostly bright with short dim periods, set the switch to the output you need most and dim from there. For a room that is bright only during the day, a lower wattage setting plus a dimmer gives the biggest saving.
The switch also decides how many fixtures fit on one dimmer, since a 120W row draws more load than the same row set to 80W. Keep the switch setting written down somewhere, because it is set at the fixture and easy to forget after the ceiling goes up.
How many 8ft lights cover a two-car garage?
Six to eight tubes usually cover a 20 x 20 ft two-car garage with even light. The 6-pack ELEKICO is a good match for that size, while the 10-pack Barrina suits a larger shop.
Spread the rows so light reaches the wall and the bench rather than pooling in the center. Run the long 94 inch tubes parallel to the garage door so the light falls across the bays instead of down the middle.
If you are still comparing lengths, our guide to the best 8 foot LED shop lights for big garages covers layout and output, and the 4 foot LED shop lights page covers smaller rooms where short tubes fit better.
Can one dimmer control a long row of 8ft lights?
Yes, if the dimmer's load rating covers the total wattage of the run. Add up every fixture on the control, then leave margin above that number because the dimmer's rating is a maximum.
A row of linked lights on one feed is easier to control than several separate switches. That is why the linkable runs on the ELEKICO and Barrina fixtures help: fewer feeds, fewer controls, and one setting for the whole ceiling.
Keep the series count within the maker's limit, which is 3 for ELEKICO and ONLYLUX and 4 for Barrina and Phiwicsh. A row that mixes a 1-10V fixture with plain tubes on the same dimmer will not dim evenly, so plan separate controls if you want both types.
What does the color switch change?
The HYPERLITE lights let you choose 3000K, 4000K or 5000K at the fixture. The other lights here are fixed, mostly at 5000K or above.
A lower color temperature feels warmer and suits a workshop or a garage where you also park a car and walk through at night. A higher one reads cooler and suits a shop where you inspect parts.
The switch is set before you mount the fixture, so choose on the ground first. The 6500K Phiwicsh and 6000K ONLYLUX are the coolest options here, and neither one lets you change it later.
For a garage you use both for parking and for projects, 4000K is a middle setting that avoids the blue cast of 6500K.
Do you need wet-location lights in a garage?
You need them where water reaches the fixture: a carport with open sides, a wash bay, a walk-in freezer, or a bay near a pressure washer. The HYPERLITE four-pack is built for those spots with an IP66 sealed body.
The IP rating covers dust as well as water, so a dusty wood shop benefits from the same sealed housing.
A dry garage does not need that housing. A slim tube like the Barrina or ONLYLUX is fine indoors and costs less.
If you are wiring lights near a door that gets wet weather, the sealed fixture is the safer buy. For garages where hands are often full, our guide to 4 foot LED with motion sensor shop lights shows the sensor option that pairs well with a dimmer.
A sealed fixture also means less cleaning inside the housing over the years.
The verdict on dimmable 8ft LED shop lights
For most buyers, the HYPERLITE 8FT LED Vapor Tight is the right fixture: it dims to 10%, lets you cap the output at 80W, and handles a damp bay. Pick the ELEKICO 100W for brightness and the Barrina pack for low running costs across a wide floor.
Choose the 1-10V HYPERLITE and wire a matching dimmer if control is the main goal. Choose a plain high-output tube and dim at the wall if the lights mostly run bright.
Either way, check that every fixture on the circuit shares the same dimming method before you buy dimmable 8ft led shop lights, because one mismatch makes the whole row hard to control.
Our top 3 picks at a glance
-
1
Best for dimming indoors and in wet roomsHYPERLITE 8FT LED Vapor Tight Light Fixture
9.5/10 our score
See it on Amazon -
2
Best for bright bays that rarely dimELEKICO Super Bright 100W 5000K 15000LM 8FT
9.3/10 our score
See it on Amazon -
3
Best for a whole shop on a budgetBarrina T8 8FT LED Shop Lights 10-Pack
9.2/10 our score
See it on Amazon
Frequently asked questions
Can you dim any 8ft LED shop light?
No. A light dims only when it is built for it and wired to a dimmer that matches its control type.
Most tubes on this page run at full brightness only.
The two HYPERLITE fixtures take a 1-10V signal.
What does 1-10V dimming need to work?
A dimmer or control that sends a 1-10V signal, plus two low-voltage control wires run to the fixture alongside the main power. A standard on/off wall switch does not dim these lights.
Can I dim a whole shop with one switch?
Yes, if every fixture on the circuit uses a dimming method the control supports. Check the dimmer's load range and the number of fixtures before you plan a single control for a long row.
Why lower the wattage switch on a dimmable fixture?
The wattage switch sets the top end of the output. Running a 120W fixture at 80W gives you less light and less power draw, which suits a workbench row or a smaller room where full output is too bright.
Do dimmable 8ft shop lights work on a high ceiling?
They do, but 8ft tubes spread light downward, so a 20 ft ceiling needs more fixtures or a high-bay fixture aimed at the floor. Dimming helps at night when you want less glare in a tall room.
About this guide: Our look at dimmable 8ft led shop lights draws on maker specs, materials and what owners report. See how we research.



